BATTERY SWAPPING STATION
DCEX 60/60 | 60/60/60/60
180kW - 240kW
The charging cabinet is an intelligent device for battery charging. It is composed by a main control cabinet body. The main control cabinet has 12 rechargeable cubicles.
This product is suitable for charging and switching of intelligent NCM and LFP battery tramcar. It’s suitable for unattended power exchange. Using the programmable controller as the main control unit, the system runs more safely and reliably. It can monitor various current status information such as current, voltage, power and distribution equipment, temperature and equipment abnormality of the charging terminal in real time with completely fulfilled intelligent and integrated management of the platform.
- Front End Battery Mounting for Charging and User Access.
- Back end Service door for easy maintenance and independent working.
- Back end Air Cooling (AC ) Mounting for greater experience at the Front end of Swapping station.
- Individual Battery and slot working allows flexibility in design and independent working.
- Height to ground for Easy swapping of the battery and Water entry sparking.
- Aircon Cooling facility.
- Single Swapping Station support NCM and LFP different configuration and capacity without any hurdle.
- Easy to operate with 15” Touch Screen and advance functionality.
Technical Specifications
| PARAMETER | INPUT |
|---|---|
| LOCK CATEGORY FOR EACH SLOT | SPRING LOCK AT EACH DOOR |
| AIR COOLED | CAPACITY: 1500W |
| CABINET SIZE | 1100*650*1850 MM |
| CHARGER TYPE | CHARGER : 60V，MAX. CURRENT: 20A |
| CHARGER CONNECTOR | ANDERSON CONNECTOR |
| BATTERY INFORMATION | 42- 60V: NCM & LFP | >13S, 14S,15S,16S CELLS IN SERIES |
| IDENTIFICATION | RFID CARD (LOCAL) OR DIRECT PASSWORD |
| VOLTAGE INPUT(V) | 415V (+6% AND -10%) AS PER IS 12360 |
| SELECTION OF BATTERY | BATTERY SWAPPING |
| FUNCTIONS | RECOGNIZE BATTERY TYPE |
| CHECK STATE OF DISCHARGE | |
| SWIPE CARD FIRST, THEN CHARGED BATTERY DOOR OPEN | |
| DISPLAY ON SCREEN: ALL BATTERY STATUS (CHARGE/DISCHARGE) | |
| TEMP. REPORT | |
| AUTOMATICALLY CUT OFF POWER WHEN FULL LOAD | |
| FREQUENCY (HZ) | 50HZ, ±1.5HZ |
| FULL LOAD POWER OF EACH SLOT (W) | 1000W |
| INPUT IMPEDANCE | ≥100KΩ |
| QUANTITY | 12 NOS |
| BATTERY SLOT DIMENSION | 233*234*455MM |
| VOLTAGE OUTPUT (V) | 415V (+6% AND -10%) AS PER IS 12360 |
| MAX. CHARGING CURRENT AT EACH SLOT | 20A |
| MAX. CHARGING POWER AT EACH SLOT | 1000W |
| DISPLAY | 15” TOUCH SCREEN |
| EXTERNAL COMMUNICATION | 3G/4G/ETHERNET |
| COMMUNICATION PROTOCOL | COMMUNICATION BETWEEN CABINET AND |
| PLATFORM: NOT IMPLEMENTED AND OPEN AS FOR CUSTOMER | |
| OPERATING TEMPERATURE RANGE | -25⁰C TO +75⁰C, 50% LOAD DE-RATED 55⁰C |
| AMBIENT HUMIDITY | 5% TO 95% RH NON-CONDENSING |
| AMBIENT PRESSURE | 86 KPA TO 106 KPA |
| STORAGE TEMPERATURE | 0 TO 60°C |
| SHORT CIRCUIT PROTECTION | SUPPORT(CUT OFF TOTAL INPUT) |
| IP RATING | IP54(OUTDOOR) |
| LIGHTNING PROTECTION | SUPPORTED |
| CAMERA MONITORING | SUPPORTED |
| LEAKAGE PROTECTION | SUPPORTED (AC TYPE RESIDUAL CURRENT 30MA) AS PER IEC 61851 |
| GROUNDING PROTECTION | SUPPORTED AS PER IEC 61851 |
| OVER TEMPERATURE PROTECTION | SUPPORTED AS PER IEC 61851 |